| Features | CG 30 |
|---|---|
| Main cone | ISO-40 - DIN 2080 - DIN 69871/2 - MAS 403 BT (45º) |
| Axial load capacity | |
| Radial load capacity | |
| Maximum torque | |
| Maximum RPM | |
| Drilling capacity (600 N/mm2) | |
| Tapping capacity (600 N/mm2) | |
| Lubrification | Grease (free maintenance) |
| Cone pressurisation | Maximum 2 bars |
| Concentricity | 0,01 mm |
| Weight (without motor) |
| Rotary joint | Pneumatic release |
| Minimum unclamping pressure: 3.3 bar | |
| Tool clamping force: 12 kN (DIN 69871) | |
| Tool clamping force: 10.5 kN (MAS 403 BT 45°) | |
| Automatic tool clamp | 1 coolant passage channel (max. 60μm) |
| Cutting fluid, oil, MQL | |
| Max. pressure 70 bar (MQL 10 bar) | |
| Encoder | 4,096 pulses |
| A+, B+, R+, A-, B-, R (zero pulse) |
| CG.30 | AM | 601 | 0 | 0 | - | B | 1 |
|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 |
AM : Mechanical clamp
AA : Pneumatic clamp MAS 403-1982 BT/PT2 (45º)
AB : Pneumatic clamp DIN 69871/69872
| R.P.M | TORQUE (Nm.) | Transmission | Motor | |
|---|---|---|---|---|
| 601 | 927 | 16 | 1,3/1 | 1,5 kW 700 r.p.m. |
| 602 | 836 | 17 | 1,2/1 | |
| 603 | 700 | 21 | 1/1 | |
| 604 | 506 | 28 | 1/1,4 | |
| 605 | 471 | 31 | 1/1,5 | |
| 606 | 332 | 44 | 1/2,1 | |
| 607 | 1854 | 20 | 1,3/1 | 4 W 1400 r.p.m. |
| 608 | 1673 | 22 | 1,2/1 | |
| 609 | 1400 | 26 | 1/1 | |
| 610 | 1026 | 36 | 1/1,4 | |
| 611 | 943 | 39 | 1/1,5 | |
| 612 | 665 | 56 | 1/2,1 | |
| 613 | 1218 | 17 | 1,3/1 | 2,2 W 920 r.p.m. |
| 614 | 1100 | 18 | 1,2/1 | |
| 615 | 920 | 22 | 1/1 | |
| 616 | 674 | 30 | 1/1,5 | |
| 617 | 610 | 37 | 1/1,7 | |
| 618 | 437 | 42 | 1/2,1 | |
| 619 | 3800 | 15 | 1,3/1 | 4 kW 2870 r.p.m. |
| 620 | 3430 | 18 | 1,2/1 | |
| 621 | 2870 | 24 | 1/1 | |
| 622 | 2043 | 28 | 1/1,4 | |
| 623 | 1923 | 31 | 1/1,5 | |
| 624 | 1364 | 28 | 1/2,1 |
0: Head without encoder
1: Head with encoder voltage 5VDC±5%TTL/RS42
2: Head with encoder voltage 10…30VDC, HTL/PP
*NOTE: Encoder not available for head with mechanical clamp
0: Head without interior cooling
1: Head with interior cooling
*NOTE: For units with automatic tool clamping, the tool's internal cooling system is included by default.
A, B, C, D
1, 2, 3
